![background image](http://html1.mh-extra.com/html/multiquip/ar14h/ar14h_operation-manual_1854956022.webp)
PAGE 22 — AR14H RIDE-ON ROLLER • OPERATION MANUAL — REV. #3 (09/06/19)
INSPECTION
FUEL CHECK
1. To check the engine fuel level, place the roller on secure
level ground with the engine stopped.
2. Tilt the operator's seat (Figure 11) forward to gain
access to the fuel tank. The seat is equipped with a
latch that keeps the seat locked in place when tilted
forward.
Figure 11. Fuel Tank Access
DANGER
Motor fuels are highly flammable and can
be dangerous if mishandled.
DO NOT
smoke while refueling.
DO NOT
attempt
to refuel the machine if the engine is
hot
or running.
FUEL FILLER
NECK
SEAT
SEAT
LATCH
ENGAGED
TILT DRIVER’S SEAT
FORWARD
3. Read the fuel gauge (Figure 12) located on top of the
filler cap to determine if fuel level is low.
Figure 12. Fuel Gauge
4. If the fuel level is low, remove the fuel filler cap and
fill with unleaded gasoline. Wipe up any spilled fuel
immediately.
5. Pay attention to the fuel tank capacity when replenishing
fuel. Refer to the fuel tank capacity listed on the
specifications table.
6. After replenishing fuel, make sure filler cap is securely
tightened to fuel tank. Return operator's seat to normal
operating position.
HYDRAULIC OIL CHECK
1. To check the hydraulic oil level, place the roller on
secure level ground with the engine stopped.
2. Visually inspect the hydraulic oil sight glass (Figure 13)
located on the right rear of the front drum. For normal
operation the hydraulic oil level must be below the
top and above the bottom of the sight glass.
DO NOT
OVERFILL!
Figure 13. Hydraulic Oil Sightglass
HYDRAULIC
OIL LEVEL
SIGHT GLASS
NORMAL
LEVEL
LOW
LEVEL
ADD
HYDRAULIC
OIL