![background image](http://html1.mh-extra.com/html/multiquip/ar14h/ar14h_operation-manual_1854956024.webp)
PAGE 24 — AR14H RIDE-ON ROLLER • OPERATION MANUAL — REV. #3 (09/06/19)
OPERATION
STARTUP
1. Place your foot into the roller's foot step, grab hold of
the hand rail located on the steering console, and lift
yourself onto the platform.
2. Sit down in the operator's seat and adjust the seat
for a comfortable position, then fasten the seat belt
(Figure 17) around your waist.
NEVER
operate the
roller without the seat belt being fastened. Serious
injury could occur if the seat belt is not used.
Figure 17. Securing Seat Belt
3. Before starting engine, make sure the immediate area
is free of obstructions and debris that may lay in the
roller's path.
4. Make sure that the roller's travel lever (Figure 18) is
placed in the neutral position.
Figure 18. Travel Lever (Neutral)
NOTICE
DO NOT
attempt to operate the roller until the Safety,
General Information and Inspection sections have been
read and understood.
FASTEN
SEAT BELT
NEUTRAL
5. In cold weather, start the roller with the choke fully
closed. In warm weather or when the engine is
warm, the roller can be started with choke halfway or
completely open.
Figure 19. Choke Knob
6. Slide the throttle control (Figure 20) all the way to the
left for maximum rpm.
Figure 20. Throttle Control
PUSH DOWN
TO OPEN
PULL UP
TO CLOSE
SLOW
FAST
THROTTLE
CONTROL LEVER