Multiplex MB-8-1, Technician'S Handbook

Page: 49 / 178

Part Number STH034 3/12 49
DOORS/HINGES
Over time and with heavy use doors and hinges may
become loose. If this happens tighten the screws that
mount the hinge brackets to the frame of the unit.
Loose or sagging doors can cause the hinges to pull
out of the frame, which may damage both the doors
and the hinges. In some cases this may require
trained & qualified service agents or maintenance
personnel to perform repairs.
NOTE: Do not place hot pans on/against the blue ABS
liner. Do not throw items into the storage area. Failure
to follow these recommendations could result in
damage to the interior of the cabinet or to the blower
coil. Overloading the storage area, restricting the
airflow, and continuous opening and closing of the
doors and drawers will hamper the unit’s ability to
maintain operational temperature.
PREVENTING BLOWER COIL CORROSION
Immediately wipe up all spills.
ANNUAL PLANNED MAINTENANCE
The following parts are recommended for annual
planned maintenance replacement to ensure optimum
unit performance and minimize downtime:
•
Refrigerator door gasket (cleaning may be
sufficient)
• (2) #6 O rings for the water and CO
2
/air quick
connect lines
• (9) LMS valves
• (1 Or 2) Mixer assemblies