Multiple Awnings inc. – 1505A rue de l’Industrie, Beloeil QC, J3G 0S5 CANADA
22
Multiple Shade V01.3 04 2019
9. Programming the limits of your Solar Shade
NOTE: Program the close limit and then open limit immediately after.
9.A. Programming the close (up) limit and the open (down) limit
1.
Plug in the AC power cable to your motor, the motor will emit 3 beeps.
2.
Immediately afterwards, press the P2 button (see figure 11) at the back of the
remote 1 time, the motor will emit 1 beep and jog once.
3.
Immediately afterwards, press the close (up) button (see figure 12) on your remote 1
time, the motor will again emit 1 beep and jog twice.
4.
Immediately afterwards, press again the P2 button at the back of the remote 1 time,
the motor will now emit 3 beeps and jog once, the motor is now ready for setting the
limits.
5.
Immediately afterwards, press the close (up) button on your remote 1 time, the solar
shade will start closing, when you have reached the desired close position; PRESS THE
STOP BUTTON (see figure 12) on your remote 1 time.
6. Immediately after, PRESS AND HOLD THE STOP BUTTON FOR 5 SECONDS, the motor
will emit 3 beeps and jog twice, this will confirm the closing position.
7. Press the open (down) button (see figure 12) on your remote 1 time and press the
stop button on your remote 1 time when the solar shade has reached the desired
open (down) position.
8. Immediately after, PRESS AND HOLD THE STOP BUTTON ON YOUR REMOTE FOR 5
SECONDS, the motor will emit 3 beeps and jog twice, this confirms the setting
of the open (down) position.
BOTH THE CLOSE AND OPEN LIMITS ARE NOW SET, PRESS THE CLOSE (UP) BUTTON 1
TIME AND VERIFY THAT THE SOLAR SHADE CLOSES CORRECTLY AS PER YOUR SETTING.
THEN PRESS THE OPEN (DOWN) BUTTON 1 TIME TO CONFIRM THAT THE SOLAR
SHADE OPENS CORRECTLY AS PER YOUR SETTING.
Figure 11
Figure 12
NOTE: Motorized MultipleShade‘s fabric comes out from the front of the casing.
