Multiple Awnings inc. – 1505A rue de l’Industrie, Beloeil QC, J3G 0S5 CANADA
17
Multiple Shade V01.3 04 2019
PROGRAMMING THE OPEN LIMIT (Solar powered only)
1.
Make sure that the Solar Panel is connected to your motor.
2.
Using you remote handset’s open (down) button, open the MultipleShade
about halfway.
3.
Press the open (down) button of the remote handset and let it go; if the motor
is still running after the MultipleShade has reached the desired open limit, stop
it by pressing the stop (middle button) on the remote.
4.
Regardless of the arrows directions shown besides the adjustment, the
endless screw which is to the front of the MultipleShade controls the OPEN
limit.
5.
Turn the endless screw which is at the front of the MultipleShade counter
clockwise to change the open limit of your MultipleShade (to open more),
turning clockwise will back off the open limit if the motor kept running after
you had pressed the close button (see step 3). If the MultipleShade does not
move, continue turning the screw until the MultipleShade moves.
6.
Once the limit is properly set, cease any adjustment and press the middle
button on your remote handset.
BOTH THE CLOSE AND OPEN LIMITS ARE NOW SET, PRESS THE CLOSE (UP)
BUTTON 1 TIME AND VERIFY THAT THE SOLAR SHADE CLOSES CORRECTLY AS
PER YOUR SETTING. THEN PRESS THE OPEN (DOWN) BUTTON 1 TIME TO
CONFIRM THAT THE SOLAR SHADE OPEN CORRECTLY AS PER YOUR SETTING.
NOTE: All motorized MultipleShade‘s fabric comes out from the front of the casing.
Manual MultipleShades have the fabric coming from the rear of the casing to accommodate
the manual crank.
