manualshive.com logo in svg

Multiple Awnings Multiple Shade, User And Installation Manual

Share
Download
Multiple Awnings Multiple Shade User And Installation Manual Download Page 13

Multiple Awnings inc. – 1505A rue de l’Industrie, Beloeil QC, J3G 0S5 CANADA  

 

13 

Multiple Shade V01.3  04  2019 

 

6.  MultipleShade equipped with Solar Panel 

Solar Panel equipped MultipleShades have a different motor which is powered by a Solar Panel 
(see figure 15). The solar panel integrates an internal 24V battery that powers the 24V motor 
supplied  with  the  Solar  Powered  MultipleShade.  The  Solar  Panel  can  be  installed  in  the  top 
groove of the MultipleShade’s housing when your Multiple Shade is on a wall type installation. 
For soffit type installations, 2 wall brackets are included with the solar panel. The solar panel 
needs to be oriented so that the top surface is exposed to sunlight for proper charging of the 
solar panel in question. 

                                        

 Figure 15 

    6.1   Solar panel installed on MultipleShade housing 
 

  

This procedure implies that your MultipleShade is being installed on a wall or similar  

                surface using the rear groove of the housing to fix it on the brackets.  

 

 

1-

 

Insert

 

the housing bracket (already installed at the back of the solar panel) into the  

                   top groove of the MultipleShade’s housing, insert the large lip first and snap in the  
                   other lip (see figure 16). 
 

 2- Tighten the M6 set-up hex screws with a 5 mm Allen key to secure the solar panel to  

                   the MultipleShade’s housing (see figure 16). 
 

 3- Align, connect and secure the Solar Panel’s connector to the motor connector.  

                   Make sure to screw in the protective cap attached to the solar panel connector tightly   
                   (see figure 17). 

Figure 16 

 

               

 

                                                 

 

Figure

 

17 

Summary of Contents for Multiple Shade



























Reviews:

No comments

Brands by name

Popular brands

Load more brands