4
© Multilink Inc. 2020
•
All Rights Reserved
Multilink Inc.
580 Ternes Ln. | Elyria,OH 44035 | 440.366.6966 | www.gomultilink.com
CAUTION / ATTENTION
The statement following the
CAUTION
heading alerts the equipment user of a condition that could
result in damage to the subject equipment or ancillary equipment if care is not exercised during
certain maintenance or operating procedures.
La déclaration suivant la rubrique
ATTENTION
avertit l’utilisateur de l’équipement d’une condition qui
pour-rait endommager l’équipement concerné ou l’équipement auxiliaire si les soins ne sont pas exercés
pendant certaines procédures de maintenance ou d’exploitation.
Emergency Shutdown Procedure
DANGER
Exercise extreme caution when performing the following procedure. Carry out the steps pre-
cisely in the order given to avoid the possibility of personal injury or equipment damage.
Perform the following procedure if the Safety Automatic Transfer Switch (SATS) must be shut down
and disconnected on an emergency basis:
1. Open the upstream AC utility input circuit breaker servicing the cabinet.
2. If a generator is in use, disconnect the generator from its outside cabinet generator con-
nector to complete shutdown of power to the load.
3. If using the SATS with a Multilink EDP series UPS, turn off the AC circuit breaker and discon-
nect the battery harness from the front of the UPS. The EDP series accepts multiple sources
of power and all must be removed to safety shut down the SATS.
4. If using the SATS with a Line Interactive UPS, open both the AC circuit breaker and DC cir-
cuit breaker on the UPS.
General Safety Issues
The Safety Automatic Transfer Switch that is documented in these instructions has been designed,
tested, and produced to ensure safe, trouble-free operation. Personnel installing or using this SATS
should completely read and fully understand the following safety instructions. They are provided
here as informational guidelines for your continued safety in the usage of this product.
Safety Issues with the Safety Automatic Transfer Switch Installation and Use
The SATS has been designed and built to power Department of Transportation and Intelligent Traffic
Systems equipment. It is not intended for any other usage and provides output voltages suitable
only for its intended application. Please contact Multilink if use of this product falls outside of DOT/
ITS equipment.
