Multilaser AU602, User Manual

Page: 17 / 24

17
2. Features
• 600Amps peak/250 Amps booster starting power.
• Starts cars, trucks, recreation vehicles and boats without the need of a host vehicle or AC power cords.
• 12 V cigarette lighter socket with overload protection provides power for utilities and appliances that usually plug into a
vehicle or boat 12V cigarette lighter socket.
• Provides up to 50-hours of DC power when use with 12 DC socket.
• Allows 12V appliance to be used in remote sites and/or in emergency when commercial power is not available.
• Solid-state, automatic operation and circuit protection.
• Maintenance-free, 7AH battery.
• This system can be stored without risking acid leakage.
• 9. Heavy-duty industrial type welding cable can carry more amperage than similar units.
• Battery condition meter is color coded and easy to read.
• DC power cord allows recharging from 12V DC cigarette lighter socket.
• Molded high-impact case is tough and durable.
• Has a built-in light for roadside vehicle repair for emergency situation away from commercial power.
3. Instructions
3.1 Important Safety Instructions
• This is a domestic electrical product, which must only be used for its intended purpose, in accordance with these
Instructions. This product should never be used in a commercial environment.
• Check the rating plate to ensure that the correct input voltage is being supplied to the product.
• Always switch the product off and remove the plug from the wall socket when not in use and before cleaning or
changing accessories.
• Most domestic appliances must be attended at all times when in use. Never leave this product unattended when
connected to the mains supply unless instructed to do so by these instructions.
• Always ensure the product is switched off before connecting it to the mains supply.
• Never reach for an electrical product that has fallen into water. To do so will result in an electric shock. Switch off the
power at the wall socket and disconnect the plug before attempting to remove it from the water. After removing, never
attempt to re-connect the product until it has fully dried and been tested and approved by a qualified person.
2. Features / 3. Instructions