SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc.
Made in the USA
Page
46
Reference and Timecode Configuration
Each camera chain in the SilverBack V base unit has dedicated reference sync and timecode inputs. For
dual camera chain systems, either chain’s reference or timecode input may be internally routed to
either or both of the camera chains.
To configure the base unit reference and timecode settings, navigate to the Base Unit Settings menu
and select Reference, then select the desired REF and LTC input for each camera chain.
Base Unit Menu > Base Unit Settings > Base Reference Settings
The reference and timecode routing settings may also be configured from the webpage dashboard
accessed from the Base Unit.
Serial Data Configuration
SilverBack V base unit Serial Data Channel settings are configured in the Data Settings menu. Each data
port can be configured for RS232/RS422 type data or LANC control data. The factory default settings are
RS232/422.
To configure a data channel, navigate to the Base Unit Settings menu and select Data, then select the
desired data types for the camera and data ports of each camera chain.
Base Unit Menu > Base Unit Settings > Base Data Settings
The serial data settings may also be configured from the webpage dashboard accessed from the Base
Unit.
