SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc.
Made in the USA
Page
13
Neutrik opticalCON DUO Hybrid Fiber Connector Systems
Systems with Neutrik opticalCON DUO connectors typically provide both fiber-optic connectivity to the
camera and power to the SilverBack V camera unit. Connect the camera units to these ports using
opticalCON DUO cabling. It is recommended to power off the base unit, where possible, before
connecting hybrid fiber cable to the camera unit.
Base units without camera power are also available with OpticalCON DUO connectors. For these
systems, either opticalCON DUO cables or single-mode fiber (tactical) with LC/UPC connectors may be
used.
Camera 1
Camera 2
ST Connector Systems
Systems with ST fiber connectors do not provide power to the SilverBack V camera unit. Connect the
camera units to these ports using ST/UPC single-mode fiber (tactical). Power for the camera units must
be provided locally at the camera or by using a “juice” power supply and hybrid-fiber cabling on the final
fiber run to the camera.
Camera 1
Camera 2
