14
Multicom Programming Methods
Programming the Device
1. Once logged on to the device click the
‘Program’ tab.
2. Enter the ‘Program Code’ (Default: 1345) and
click OK.
3. You can now edit any available Settings and
click ‘Save’ to upload your changes.
7
Quick Start Guide
MC3G
MC3G
5. Interconnect Multicom Relay Output
Input/COM:
To notify the alarm panel of MC3G
communication failure, ensure that one of the
MC3G relays is programmed to “COMM’s fail
event” (Relay 1 is programmed to this by default).
Connect the chosen MC3G relay output to one of
the Alarm Panel’s zone inputs. It is recommended
that the zone on the alarm panel be a 24 hour
audible input.
See Option 38 for relay options.
Note: Steps 4 & 5 are required to meet
Class 4 of the Australian Standard.
