18
Limited Warranty Statement
Multicom does not install or connect the products, which may be used in
conjunction with other products not manufactured by Multicom; therefore
Multicom cannot guarantee or warrant the performance of the security
system. Multicom will not be responsible for circumstances resulting
from the product’s inability to operate. Your security system should be
considered as one of many tools available to reduce risk and/or damage
caused by burglary,
fi
re or other emergencies. Other tools include, but
are not limited to, access controls, lock products, insurance coverage,
fi
re
prevention,
fi
re extinguishing devices and sprinkler systems.
We strongly
recommend that your security alarm system be tested and maintained on
a regular basis
, and that you stay aware of new and improved Multicom
products and developments.
BEWARE:
Dealers, installers and/or others selling, distributing or advertising
Multicom product(s) are not authorised to modify this warranty or make
any additional warranties that are binding on Multicom or distributors and
its af
fi
liates without the written approval from Multicom.
Multicom may change the terms of its limited warranty, without notice, at
its discretion.
WARNING:
Due to limitations of Alarm Systems, Multicom cannot
guarantee the performance of the security system and shall not be
responsible for circumstances resulting from the product’s inability to
operate. It must be understood that while your Multicom product is highly
advanced and secure, it only forms part of your total security installation
and it does not offer any guaranteed protection against burglary,
fi
re
or other emergency. This is due to a number of reasons, including, but
not limited to, inadequate or improper installation/positioning, sensor
limitations, battery performance, wireless signal interruption, inadequate
maintenance, or the potential for communication mediums to be
compromised or circumvented. As a result, Multicom does not represent
that the alarm system will prevent personal injury or property damage, or
in all cases provide adequate warning or protection. Your security system
3
Quick Start Guide
OPTION 2
Mounting or
placement
inside the
existing alarm panel
housing
requires the
included
fl
y lead to
be attached and the
included antenna to
be mounted
to the
top of the panel
Drill Bit Size - 7mm
Note: If the MC3G is being installed in a
poor signal area, please consider using a
high-gain antenna available from Suretek.
