MULTICOM BMC-3G, Installation Manual

Page: 7 / 17

12 13 Test Signal Strength Test Signal Strength
6. Download TechTools App
Use the QR code provided, or
this download link --->
bit.ly/multicom
7. Register for a TechCode
Open TechTools. Tap New Registrations, fill in
your details. Now tap Register Me, you are then
given your TechCode.
Take note of the TechCode provided, (the code
will also be emailed to you.)
8. Authorise the TechCode
Technicians: if you are installing the Multicom
on behalf of a bureau or monitoring center,
you will need to forward the TechCode to
that company who will then authorise your
TechCode allowing you to access the Multicom.
Bureau/Monitoring Center: initial configuration
must be completed by calling 1300 603 704
to tie a master TechCode to your Multicom
account. With the master TechCode you can
then control who has access to your Multicoms
and authorise other techs to access your
Bureau/Monitoring center Multicom TechCodes.
Tap ‘New Registrations”, fill in details, and tap ‘Register me’
Steve Jones
COL 923
LJG 612
WDF
187
VSQ 405
FCD 840
David Smith
Greg Harris
Max Jarvis
Gary Stevens
Tick ‘Allow’ if you
want to allow this
technician to
authorise other
Multicom techs.
These steps are for the
bureau/monitoring center.
1. Tap ‘Permissions’ 2. Enter ‘TechCode’ 3. Add Technician
bit.ly/multicom