20
OPERATING INSTRUCTIONS
DSD 660
Parental Guidance
Censorship Classification
Press
and
to select option
Press OK to confirm selection
Change PIN
U
SING
M
ENUS
To use the Menu system:
1
Ensure that the decoder is not in standby mode by
pressing
, if necessary.
2
Press MENU on the RCU. The following Main Menu is displayed,
which provides access to all other menus as shown in the
following figure:
All the menus are navigated as follows:
1
Use
>
or
?
buttons to scroll the highlighted bar up or down in
a (sub)menu or a vertical list box.
2
Select a highlighted menu option and go one level lower within the
menu hierarchy by pressing OK on the RCU. This applies to the
Main Menu screen and all submenu screens.
In screens where parameters can be set, OK is used to save the
settings.
3
Use EXIT to return to the preceding menu (go one level higher
within the menu hierarchy).
In screens where the parameters can be set, EXIT is used to
cancel any settings that may have been entered without saving.
4
Use
=
and
<
buttons to change the value of an input field
having preprogrammed values.
5
Use MENU to exit all menus and return to the TV or audio
programme.
6
Use numbered buttons to enter numerical values.
Soundtrack Options
Soundtrack Options allows users to set the programme language of the
decoder, where one is available.
To select the text language of your choice do the following:
1
Press MENU on the RCU.
The Main Menu options list is displayed.
NOTE:
On initial selection of the Main Menu, the default
setting is for Soundtrack Options.
2
Press OK to select Soundtrack Options. The following option list
is displayed:
3
On the RCU, press
>
or
?
arrows to highlight the preferred
language that you wish to relocate from the list.
4
Press
<
to move the highlighted language option into the relocation
window.
NOTE: Only two languages can be relocated into positions 1 and 2.
5
Press OK to confirm your selection.
Parental Guidance
The decoder includes a Parental Guidance facility to control viewing of age
restricted programmes. Access to this facility is controlled via the Parental
PIN code.
TIP
:
The PIN is set at the factory to 1 2 3 4. If you intend to use the
Parental Guidance facility, please change the PIN as soon as
possible. Remember to keep a note of your new PIN in a secure
place. To unblock an event refer to page 17.
Parental Guidance can only be applied to scrambled programmes.
Setting the Parental Level
1
Press MENU on the RCU.
The Main Menu options list is displayed.
2
On the RCU, press
?
to highlight Parental Guidance
The Parental Guidance screen is then displayed with the Censorship
Classification option highlighted
3
Press OK.
A Security Check screen is displayed, in which the Parental PIN
must be entered using the RCU.
4
On entering the correct PIN, a Parental Guidance submenu is
displayed, which is organised as follows:
NOTE:
If the incorrect PIN is entered, the previous menu
(Security Check) is again displayed.
Summary of Contents for 50645
Page 1: ......
