DSD 660
OPERATING INSTRUCTIONS
11
Decoder, VCR , TV, Hi-Fi
NOTE:
It is recommended that you switch off the mains
supply to the decoder before connecting or
disconnecting the LNB.
1
Connect the terrestrial antenna connector to the RF IN socket on
the decoder.
Follow Steps 2 to 4 if you are not using SCART connectors
2
Using the supplied flylead, connect the RF OUT connector on the
decoder to the RF IN connector on the VCR.
3
Using the flylead supplied with the VCR, connect RF OUT on the
VCR to the RF IN on the TV
.
4
Connect the coaxial cable from the satellite dish to the LNB IN
connector on the decoder. Tighten the connector finger tight.
Follow Steps 5 and 6 if you are using SCART connectors.
5
Using a SCART-to-SCART cable (not supplied), connect the TV
SCART connector on the decoder to the SCART socket on the TV.
6
Using another SCART cable, connect the VCR SCART on the
decoder to the SCART on the VCR.
7
Connect the VARIABLE LEFT and RIGHT HI-FI AUDIO OUT
connectors on the decoder to the LEFT and RIGHT AUDIO INPUT
connectors on the Hi-Fi.
8
Switch power on to the decoder.
9
Set the TV and VCR Scart Source and TV and VCR Scart Video
Output using the TV Installation menu. See page 23.
Summary of Contents for 50645
Page 1: ......
