MultiChannel Wireless2100-System, Manual

Page: 23 / 43

First functional Tests
Set up the Wireless2100 hard- and software as described above. Make sure all components are connected
and the Wireless2100-System is
switched on at the interface board. Connect a charged battery and the
ME/W-Signal Generator
to your headstage. See the ME/W-Signal Generator datasheet in the Appendix
for details on connector and orientation.
Open the MC_Rack software and build a rack with a Wireless2100 data source and a data display as
described above. At the signal generator, select the signal type “
Spikes
”. You should see a noise level
of about 20 μ V (peak to peak) and a signal amplitude for the largest spikes of 360 μ V.