When installing the ACP on a This T-connector, when inserted
single phone line where only in a regular RJ-ll C jack, ex-
one RJ-11 walljack is present, it pands the interface to support
may be advantageous to use a
RJ-11
C/RJ-31 X modular
4-pin/8-pin series T-connector. connectors.
4/8 Series T-Connector Wiring Diagram
1 2 3 4 5 6
1 2 3 4
1 2 3 4 5 6
RJ-11C
RJ-31X
Bar
Insertion)
By utilizing a 4/8 pin series
T-connector on a regular
RJ-11
C walljack, the ACP can
be connected to the existing
phone line without installing a
RJ-31X walljack. The ACP line
cord plugs into the 8-pin side of
the T-connector and the phone
can be plugged into the 4-pin
side.
Note: If more than one RJ-11
C
jack is present on the existing
phone wiring, the 4/8 pin series
T-connector should be inserted
8
on the first incoming walljack
on the phone line. The phone
line wire running to the next
walljack should be discon-
nected at the first walljack. This
will ensure that all incoming
calls will be routed through the
ACP. If the additional RJ-11 C
walljacks are needed for phone
extensions, simply crimp an
RJ-11
C modular plug on the
end of the disconnected line
and plug it in to the RJ-11 C
side of the 4/8 pin T-connector.
