W A R N I N G
The
“Tip” and "Ring" labeling is important when attaching
wire pairs to the numbered pins. There should be no
deviation from the diagram on
page 5
. Any deviation would
result in reverse polarity problems for the phone system
and data equipment used on the ACP.
The “shorting bars”
in the RJ-31 X walljack allow for continuation of voice service
to the phone system when the 8-wire line cord is unplugged. If
the line cord is unplugged from the ACP and still left attached
to the walljack, calls will not get through to the phone system.
In this section, we will detail
the most common types of
wiring configurations found in a
business location. The proper
installation point for the
RJ-31X walljack in each wiring
configuration is represented by
a black box labeled “31X”.
Installing the RJ-31X at that
point or before on the incoming
phone line should guarantee
correct operation of the ACP
unit.
Single Line
Installation
RJ-31X placement in a single-
line wiring configuration occurs
before all existing phone
equipment. The wiring config-
uration is characterized by a
single incoming phone line
with single or multiple RJ-11
walljacks.
Incoming Phone Line
P H O N E
PHONE
RJ-11 Walljacks
