Mul-t-lock Entr User Manual Download

Page: 24 / 47

ENTR® User Manual

5.6 Open Door

5.7 Lock Door

Touch Touchpad Reader screen with palm

or fingers.

Press

[Personal PIN Code]

[#]

Red

[Error]

illuminated for 1 second,

1 long beep emitted.

Not opening

Touch Touchpad Reader screen with palm

or fingers.

Press

[1]

[#]

Red

[Error]

illuminated for 1 second,

1 long beep emitted.

Not locking

5.9 Delete all PIN Codes

Touch Touchpad Reader screen with palm

or fingers.

Press

[

]

[Master PIN Code]

[#]

Press

[22]

[#]

Enter

[Master PIN Code]

[#]

Reenter:

[Master PIN Code]

[#]

5.8 Delete PIN Code

Touch Touchpad Reader screen with palm

or fingers.

Press

[

]

[Master PIN Code]

[#]

Press

[33]

[#]

To delete enter:

[Personal PIN Code]

[#]

Green

[OK]

illuminated for 1 second,

2 short beeps emitted.

PIN Code deleted

PIN Code not deleted

Red

[Error]

illuminated for 1 second,

1 long beep emitted.

Green

[OK]

illuminated for 1 second,

2 short beeps emitted.

Note:

Master PIN Code can not be deleted.

All PIN Codes deleted

All PIN Codes not deleted

Red

[Error]

illuminated for 1 second,

1 long beep emitted.

Summary of Contents for Entr
















































Search results

Summary of Contents for Entr

Reviews:

Related manuals for Entr

Brands by name

Popular brands

Mul-t-lock Entr, User Manual

Search results

Summary of Contents for Entr

Reviews:

Related manuals for Entr

Brands by name

Popular brands