OPERATING YOUR ULTRAFORCE PRESSURE WASHER
1. The washer must be used on a
secure and stable surface in a
standing, upright position.
2. Attach the handle to the top of
the pressure washer unit, using
the two screws and L-shaped
screwdriver provided.
3. Attach the detergent bottle to the
backside of the washer. Press
the yellow button on top of the
bottle and slide in the bottle to
firmly attach.
ASSEMBLY
SAFETY DEVICES
The built-in
unloader valve
can reduce pressure
if it exceeds pre-set values (max. pressure of
1900PSI).
Safety lock on the trigger gun
- when the lock is
activated, the trigger gun cannot be operated.
THERMAL SENSOR
A thermal sensor protects the motor from over-
heating. The unit will restart after a few minutes
when the thermal sensor has cooled off.
LOCK
UNLOCK
6
