1. Turn the water supply tap ON com-
pletely.
2. Release the safety trigger gun lock.
Press the trigger for a few seconds
until water flow is steady. This will
allow air to escape and discharge
any existing pressure in the hose.
3. Turn the power switch to the ON
position to start the pressure
washer.
!
OPERATION
USING THE NOZZLES
CAUTION:
Before turning it on, ensure that the pressure washer is in
an upright position.
Always hold the trigger gun and spray wand firmly with both hands
during operation.
Point the spray gun at the ground.
0 degree
15 degree
25 degree
40 degree
LOCK
UNLOCK
9
