4. Remove the water inlet cap
and tighten up the inlet water
hose connector, using the
wrench provided.
5. Insert the power cord holder
and trigger gun holder into
their positions.
6. Connect one side of the high-
pressure hose to the trigger
gun and the other side to the
water outlet.
7. Connect your garden hose to
the water supply outlet. Run
water through the hose to
flush out any dirt or sand
before connecting to the
pressure washer.
WARNING!
Keep hose away
from sharp objects. Bursting
hoses may cause serious
injury. Examine hoses regu-
larly and replace if damaged.
Do not attempt to repair a
damaged hose.
Connect the garden hose to
the water inlet of the pres-
sure washer. The water
supply must be at least equal
to the washer delivery capac-
ity.
7
