Mueller SENTRY II Installation And Operation Manual Download Page 52

Page: 52 / 83

18. Press the

✚

key to display the current

settings, 30 or 60 minutes.

19. Press the

✚

key to select 60 minutes or the

key to select 30 minutes.

20. Press the key to enter the selection.

21. Press the

✚

key to return to the main menu.

22. Press the

▼

key to scroll to the next option,

"Pre-Start Agitation.”

23. Press the

✚

key to display the current

settings—30 or 60 minutes.

24. Press the

✚

key to select 60 minutes or the

key to select 30 minutes.

25. Press the key to enter the selection.

26. Press the

✚

key to return to the main menu.

27. Press the

▼

key to scroll to the next option,

"Agitation Interval Timer.”

28. Press the

✚

key to display the current

settings—3 out of every 30 minutes or 3 out
of every 18 minutes.

Sentry II with Auto-Dosing Assembly Operating Instructions

Effective April 1, 2000

▲

Summary of Contents for SENTRY II




















































































Search results

Summary of Contents for SENTRY II

Reviews:

Mueller SENTRY II, Installation And Operation Manual, Page: 52 / 83

Search results

Summary of Contents for SENTRY II

Reviews: