attEntIon!!
WHEn You sEE a “ WarnInG!” BE surE to HEED tHE MEssaGE!
tHE InForMatIon contaInED In tHEsE MEssaGEs can saVE Your lIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
8
WARNING!
Under no circumstances shall
you place any more than fifteen (15) pounds (7
kg) of weight on the armrests or footrest. Doing
so will put the user in serious risk of injury or
death. Failure to follow these instructions may
result in serious injury or death!
Assembled climber, (seating is removed to
show product better).
stEP 5.
Secure
seat cushion
using attached buckles.
Snap
Buckle
Zipper
1
2
3
Secured
Cap Bolt
V-Bracket
Tab
Nylon
Net
Secured
Cap Bolt
Snap
Buckle
Zipper
1
2
3
Secured
Cap Bolt
V-Bracket
Tab
Nylon
Net
Secured
Cap Bolt
3-sEat cusHIon oPtIons
1.
Nylon Net Seat
2.
2" Thick Foam Seat
3.
2" Thick Backrest (zippered)
How to attach foam seat
Bottom view of nylon net seat: Join
snap
buckles to secure foam seat to nylon
netting.
Fig. 4a
Fig. 4
You are now ready to install your climbing
treestand. Refer to Pages 13-15,
Field Installation
,
for installation instructions.
Climbing
Cable
Spring
Bolt
Hole
Spring
Bolt
Retention
Pin
To adjust, remove
spring Bolt retention
Pin
from end of
spring
Bolt
. Pull
spring
Bolt
back and adjust
climbing cable
.
Make sure
spring Bolt
locks into a hole in
the
climbing cable
and replace
spring
Bolt retention Pin
at the end of the
spring Bolt
.
