MTZ 1220.1, Operator'S Manual

Page: 23 / 244

MTZ 1220.1/1220.3 Section D . Operation controls and instruments
D3
Starter and instrumentation switch
Switch (1) has four positions:
• 0 – “Off”;
• I –"Instruments, control lamps block,
heating plugs are on”;
• II – “Starter On” (not fixed position);
• III – “Radio receiver ON” (key is turned
counter-clockwise).
IMPORTANT! Starter restarting may be
possible "0”.
In order to shift starter and instruments
switch into position “III’, it it necessary to
sunk the key into switch slightly and then
turn it counterclockwise.
Instrument board switches
1 – main light switch, has three posi-
tions:
- “Off” (upper part of the button is sunk,
position I);
- “Front and rear marking lights, number-
plate light, board gauges light, and additional
lamps on the trailed machine are on” (middle
position, II);
- “All consumers of position II and road
lamps are on” (lower part of the button is
pressed up to the stop, position III).
2 – windscreen washer switch.
Windscreen washer is switched on by sin-
gle pressing to the button.
3 – remote AB switch. AB is switched by
single pressing to the remote AB switch but-
ton, and it is switched off by pressing the
same button again.
4 – shut-off switch for front working
lights, installed on front light brackets. By
pressing button 8 two working lamps, (in-
stalled on front light brackets) and indicator
light, built-in the button.
By pressing the emergency light alarm but-
ton 5 the emergency light alarm is engaged.
The indicating lamp blinks simultaneously with
alarm flashing light. Emergency light alarm is
disengaged by pressing the same button
again.
1 - main light switch; 2 - windscreen washer
switch; 3 - remote AB switch; 4 - shut-off switch
for front working lights, installed on front light
brackets.