7.14.17 Oil filter element – Installation
Preconditions
☑
Automatic oil filter is removed from engine.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Torque wrench, 20–200 Nm
F30026582
1
Ratchet adapter
F30027340
1
Assembly compound (Kluthe Hakuform 30-15)
X00067260
1
Engine oil
O-ring
(→ Spare Parts Catalog)
WARNING
Compressed air gun ejects a jet of pressurized air.
Risk of injury to eyes and damage to hearing, risk of rupturing internal organs!
• Never direct air jet at people.
• Always wear safety goggles/face mask and ear defenders.
NOTICE
Blowing through lines (gas lines, supply lines, etc.) with compressed air will result in airborne particles.
Risk of penetration of contaminants leading to component damage!
• Disconnect the engine from the cooling water network by fitting blanking plates at the connecting
flanges.
• Seal off connecting flanges, so that no dirt particles are blown into the engine.
NOTICE
Contaminated components.
Risk of damage to component!
• Check components for special cleanliness and clean if necessary.
NOTICE
Ingress of contamination from automatic oil filter in the engine oil system.
Severe engine damage possible!
• Remove the automatic oil filter before changing the oil filter candles.
• Keep everything scrupulously clean when performing maintenance and repair work.
• Cover all exposed openings when opening assemblies.
212 | Oil Filtration / Cooling | MS150048/05E 2018-03
TIM-ID: 0000071170 - 005
Summary of Contents for 20V4000M93 series
Page 1: ...Operating Instructions Diesel Engine 20V4000M93x MS150048 05E...
Page 3: ......
Page 4: ......
