11.
Coat O-ring (2) with assembly compound and
insert in groove on upper flushing arm (7).
12.
Fit top flushing arm on flushing arm shaft and
top strainer plate (6).
13.
Install washer (3) and spring washer (4).
Note:
Note position of screw in relation to elongat-
ed hole on shaft.
14.
Screw in screw (1) loosely.
15.
Screw on sealing nut (5).
16.
Lock flushing arm (4) in position and tighten sealing nut (5) with torque wrench to the specified torque.
Name
Size
Type
Lubricant
Value/Standard
Sealing nut
Tightening torque
40 Nm
Note:
Tolerances for gap on both sides: 0.05 to 0.3 mm.
17.
Check gap (1) between flushing arm (4) and strainer plate (2) with feeler gage . If the tolerances are not met,
replace oil filter element.
18.
Tighten screw (3).
MS150046/03E 2018-08
| Oil Filtration / Cooling | 191
TIM-ID: 0000070296 - 003
Summary of Contents for 20V4000M73 series
Page 1: ...Operating Instructions Diesel engine 20V4000M73x MS150046 03E...
Page 3: ......
Page 4: ......
