Removing basket strainer – var-
iant A
1.
Clean oil indicator filter before disassembling
it.
2.
Remove screws (1).
3.
Take off cover (2) and O-ring (3).
4.
Remove spring (4) and strainer (6) from filter
housing and allow oil to drip into container.
Cleaning strainer
1.
Shake coarse contamination out of strainer (6).
2.
Clean all metallic parts with cleaner (Snow-White 11-0), then rinse with cleaner (Hakupur 50/136).
Note:
Do not damage the fabric of the strainer.
3.
Use a soft brush to remove stubborn deposits from strainer as necessary.
4.
Blow out strainer (6) with compressed air from outside to inside.
Checking strainer
Item
Findings
Task
Strainer
Metallic residues
• Clean
• Monitor engine operation
• Check strainer daily
• Contact Service.
Strainer
Damaged
Replace
Square-section ring
Damaged
Replace
O-ring
Damaged
Replace
Installing strainer
1.
Coat square-section ring (5) on strainer (6) with engine oil and install strainer (6).
2.
Coat O-ring (3) with engine oil and install in filter housing.
3.
Install spring (4).
4.
Fill housing with new engine oil.
5.
Install cover (2) and secure with screws (1) and washers.
MS15035/00E 2018-08
| Oil Filtration / Cooling | 217
TIM-ID: 0000036227 - 010
Summary of Contents for 12V4000M*3 series
Page 1: ...Operating Instructions Diesel engine 12V4000Mx3x 16V4000Mx3x MS15035 00E...
Page 3: ......
Page 4: ......
