14.
Tighten union nut (3) on HP fuel line (2) with torque wrench to the specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Union nut
M16
Tightening torque
(Engine oil)
37 Nm +3 Nm
Final steps
1.
Clean mating faces on cylinder head and charge-air pipe.
2.
Check gaskets for damage and replace them, if required.
3.
Coat gaskets with assembly compound and place on cylinder head.
4.
Install leak-off-fuel lines.
5.
Install charge-air pipes.
6.
Install engine control system (→ Page 129).
7.
Open fuel supply line.
8.
Vent fuel system (→ Page 85).
84 | Task Description | MS150118/00E 2014-07
TIM-ID: 0000050910 - 002
