2.
Tighten screws (1) to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Screw
Tightening torque
(Engine oil)
20 Nm + 2.5 Nm
3.
Install coolant ventilation line and coolant lines on compressor casing.
4.
Install intake housing (3) with actuating cyl-
inder (2).
5.
Align clamp (1) and tighten to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Clamp
Tightening torque
15 Nm + 2 Nm
6.
Install oil lines (1). Tighten threaded adapter at actuating cylinder to specified torque using a torque
wrench.
Name
Size
Type
Lubricant
Value/Standard
Threaded adapter
10 G 1/4
A
Tightening torque
(Engine oil)
40 Nm + 4 Nm
7.
Install charge-air pipework (2) between exhaust turbocharger and charge-air cooler.
8.
Install air filter (→ Page 208).
9.
Fill with engine coolant (→ Page 231).
MS150110/00E 2013-10 | Task Description | 205
TIM-ID: 0000045630 - 001
