MTU 12 V 4000 G21R Operating Instructions Manual Download Page 97

Page: 97 / 117

7.16.4 Charge-air coolant – Filling

Preconditions

☑ Engine is stopped and starting disabled.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Charge-air coolant

WARNING

Coolant is hot and under pressure.

Risk of injury and scalding!

• Let the engine cool down.

• Wear protective clothing, gloves, and goggles / safety mask.

CAUTION

Cold coolant in hot engine can cause thermal stress.

Formation of cracks in components!

• Fill / top up coolant only into cold engine.

Preparatory steps

Turn breather valve of coolant expansion

tank counterclockwise until the first stop

and allow pressure to escape.

Continue to turn breather valve counter‐

clockwise and remove.

116 | Task Description | MS150064/01E 2011-11

TIM-ID: 0000000962 - 002

Summary of Contents for 12 V 4000 G21R






















































































































Search results

Summary of Contents for 12 V 4000 G21R

Reviews:

Related manuals for 12 V 4000 G21R

Brands by name

Popular brands

MTU 12 V 4000 G21R, Operating Instructions Manual

Search results

Summary of Contents for 12 V 4000 G21R

Reviews:

Related manuals for 12 V 4000 G21R

Brands by name

Popular brands