MTU 12 V 4000 G21R Operating Instructions Manual Download Page 65

Page: 65 / 117

7.8 Fuel Filter

7.8.1 Fuel filter – Replacement

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Filter wrench

F30379104

Engine oil
Easy-change filter

(→ Spare Parts Catalog)

WARNING

Fuels are combustible.

Risk of fire and explosion!

• Avoid open flames, electrical sparks and ignition sources.

• Do not smoke.

Replacing fuel filter

Remove easy-change filter using filter

wrench.

Clean sealing surface on filter head.

Slightly lubricate seal on the easy-change

filter.

Screw on easy-change filter by hand until

the seal connects and tighten manually.

Vent fuel system (→ Page 83).

Replace other easy-change filters in the

same way.

84 | Task Description | MS150064/01E 2011-11

TIM-ID: 0000000927 - 003

Summary of Contents for 12 V 4000 G21R






















































































































Search results

Summary of Contents for 12 V 4000 G21R

Reviews:

Related manuals for 12 V 4000 G21R

Brands by name

Popular brands

MTU 12 V 4000 G21R, Operating Instructions Manual

Search results

Summary of Contents for 12 V 4000 G21R

Reviews:

Related manuals for 12 V 4000 G21R

Brands by name

Popular brands