MTS Systems Ultimate TV, User Manual

Page: 40 / 59

37
NOTE: If a programmed mode key has no volume commands of its own, then the volume control will normally
operate the TV. If an invalid key is pressed, the selected mode key light fl ashes for 3 seconds and turns o ff . The
remote control returns to normal operation and you will need to start over.
If no key is pressed within 30 seconds, the remote control times out, the selected mode key light fl ashes for 3
seconds and turns o ff . The remote control returns to normal operation at which time you can start over.
Black MXv4 (RF) with MTS logo remote:
To cancel Volume Control Lock to a single device:
1. Press and hold SETUP until the mode key blinks twice
2. Press the MUTE key
3. The mode key ( TV , DVD , or AUX ) will blink 4 times upon successful unlock
Reset the remote
To restore the factory default settings
Silver/charcoal remote:
1. Press and hold the STB/MTS key and hold the OK key simultaneously on the remote control
2. Release both the STB/MTS key and the OK key – all four mode keys will fl ash twice indicating programming
mode
3. Enter programming code 900 by pressing the number keys on the remote control – the STB/MTS key will fl ash
three times indicating you have successfully entered the code and the remote has been reset to the factory
default settings
Note: If any other key is pressed except the number keys the STB/MTS key will give a long red fl ash and the
remote control will return to normal operation. Should the remote control time-out before you complete the
procedure you will need to start over.
Black MXv3 (RF) remote:
1. Press the TV key and while holding it pressed, press the OK key for 1 second and release both keys at the same
time
2. All the mode keys will fl ash and the TV mode key light will stay on
3. Press and hold the DELETE key for 3 seconds until the TV mode key blinks and stays o ff . The remote control is
now reset to factory default settings. If you want to use the remote control for your TV and other devices, you will
need to setup the
TV , DVD , and AUX mode keys
4. If no key is pressed within 30 seconds, the remote control times out. The selected mode key light fl ashes for 3
seconds and turns o ff . The remote control returns to normal operation and you will need to start over
Black MXv4 (RF) with MTS logo remote:
1. Press and hold SETUP until the LED blinks twice
2. Press 981 on the number pad and the LED will blink 4 times
3. The mode key ( TV , DVD , or AUX ) will blink 4 times upon successful unlock