MTS Systems DCPD, Manual

Page: 19 / 38

Description Label Item
Power switch: I = on, O = off. I/O 8
Chassis and earth ground connections. Grounds 9
Standard AC power plug. Input Power 10
Connector pairs: orange are analog outputs to the
controller; green and yellow and connections to the Channel n 11
preamp. A typical DCPD system supports a single
reference specimen and a single active specimen.
Connects between the DCPD box and the reference
specimen and active specimen(s). One preamp is required
for every two specimens Preamp 12
.
Status Lights (Front View)
Description Light
Red
Green
Specifications
Specification Parameter
100-240VAC, 50-60Hz, 5-2Amp Input voltage
5ºC to 40ºC (41ºF to 104ºF) Temperature
5% to 85%, non-condensing Humidity
2000 m (6562 ft) maximum Altitude
DCPD Measurement System 19
Introduction