DCPD Installation
Prerequisites
•
DCPD installation involves finding a suitable place to put the device, and connecting the cables.
•
Exercise care when connecting the cables.
•
Ensure that you are using the correct cables, and that all connections are secure.
•
To maintain EMC compliance and help ensure optimal performance, MTS recommends ordering all system
cables from MTS.
•
Cables should be installed so that they are protected from conditions that could damage the cable.
•
When you are finished, double-check to ensure that all components are connected properly.
Caution:
There is dangerous voltage inside the enclosure.
Connecting cables with power applied can cause damage to the device.
Ensure that the power is turned off before connecting cables.
22
DCPD Measurement System
Installation
Summary of Contents for DCPD
