RAPIDDOC
™
LITE INSTALLATION GUIDE
9
MTI P/N 063-00223 rev C ©2020 MTI All Rights Reserved
www.MTIGS.com | T:800.426.6844
1
1
2
2
Docking
The case is secure when it clicks into the base.
Dock the case to the base by moving case towards the
base, aligning the disk on the case to the disk on the
base.
NOTE: Wait 30 seconds between Access Card swipes or the latches
may overheat. The LED will start Flashing Orange. Wait until the
flasing stops (approximately 2 minutes) and Try again. If your tablet does
not release, try using the Red Handle Tool to manually remove the tablet.
RFID Release
Within five seconds, remove the case away from the
base. If the case is not removed within five seconds, the
lock will re-engage. Up to 10 access tries are allowed,
then a two minute waiting period before another try will
be triggered.
Place a registered Access Card on the RFID module, the
LED indicator will begin to flash.
-CONTROLLED DOCUMENT-
063-00223
C-0
Status: Approved
ECO-111786
ECO-111786
