RAPIDDOC
™
LITE INSTALLATION GUIDE
3
MTI P/N 063-00223 rev C ©2020 MTI All Rights Reserved
www.MTIGS.com | T:800.426.6844
1
3
4
2
Wall Mount Kit - Pre-Installation
Use the holes circled in pink on the mounting plate for
installation on a Single Gang Box and those circled in
blue for installation on a Double Gang Box.
48”
RFID
Cable
RapidDoc
RapidDoc
Determine the location of the RFID Reader, within the
48” length of the RFID cable.
It is recommended to install the RapidDoc using a Gang
Box attached to a wall stud. Pull the charging cable from
the power supply cable to the Gang box.
Install the RFID Flush Mount on the wall (use anchor
bolts if necessary).
-CONTROLLED DOCUMENT-
063-00223
C-0
Status: Approved
ECO-111786
ECO-111786