MTI R558 Page 70 User Manual Download | Manualshive

Page: 70 / 91

background image

Driver Files

(1) The enclosed CD-ROM contains the following SiS 5597/5598 ADI file:

RCPSIS.EXP

SiS ADI driver (for all resolutions & colors)

          Note: This version of the ADI driver does not support 16-color operation.
(2)     This driver fits for a series of Autodesk Inc. products including:
          1 - AutoCAD/386 R11
          2 - AutoCAD/386 R12
          3 - AutoShade/386 V2.0
          4 - 3D Studio V3.0
(3)     Their installation procedures are different from program to program.
          The first step of installation is the same for all these programs. Make sure
           you unpack  and copy drivers to where you would like them to reside.
(4)     A detailed description of the installation procedures for each program is
          given in Sec. 1.2.2 to Sec. 1.2.5.

Unpack & Copy

To unpack and copy drivers please perform the following procedures:
(1) Run "INSTDRV.EXE" where it resides. For example,

D:\>MM\DOS\INSTDRV <Enter>

(assuming INSTDRV.EXE resides in

          CD-ROM  "D")
(2)     In SiS's Super VGA Driver Installation menu, select "A. ADI 4.2" to unpack
         and copy  drivers.  (To select, type "A")
(3)     In "Unpack & Copy ADI 4.2 Drivers" screen,

key in the "drive:\directory"

where these drivers will reside

(default C:\ADI42) The program will unpack

and copy all related driver files to designation you assign.

(4) After unpack and copy are complete, exit the INSTDRV.EXE program.
(5) Refer to Sec. 1.2.2 to Sec. 1.2.5 for the installation procedures of each

program.

AutoCAD R11 Setup

(1)    The following procedures assume that
         1 - You have completed the unpack & copy procedure.
         2 - Your ADI 4.2 drivers are located in C:\ADI 42.
(2)    Add the following setting to your own batch file for AutoCAD R11 (i.e.
         ACADR11.BAT) or to your AUTOEXEC.BAT file:

SET DSP ADI=\ADI42\RCPSIS.EXP<Enter>

_______________________________________________________________
6- 4

_________________________________

【

【

【

【

6

】

】

】

】

(3) Delete the configuration file ACAD.CFG that resides in the \ACAD directory.
(4) Type

ACADR11 <Enter>

to configure your AutoCADR11 system.

(5) In "Select Display Device:" item, choose "ADIP386 V4.0/4.1 display."

«
...
68
69
70
71
72
...
»

Summary of Contents for R558




























































































Reviews:

No comments

Related manuals for R558

Brand: hager Pages: 4

Brand: IEI Technology Pages: 153

Brand: Supero Pages: 80

LPC1768-Xplorer

Brand: NGX Technologies Pages: 25

Brand: Supermicro Pages: 1

Brand: MAX power Pages: 20

Brand: ECS Pages: 87

DS320PR412-421EVM

Brand: Texas Instruments Pages: 31

Brand: TYAN Pages: 74

Brand: DFI Pages: 113

Brand: Asus Pages: 64

Brand: Asus Pages: 144

Brand: Asus Pages: 96

Brand: Asus Pages: 86

Brand: Asus Pages: 96

970 PRO GAMING/AURA

Brand: Asus Pages: 76

Brand: Asus Pages: 108

Brand: Asus Pages: 142

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands