MTI R558 Page 76 User Manual Download | Manualshive

Page: 76 / 91

background image

Driver Files

(1) The enclosed SiS 5597/5598 Windows 95 drivers files are:

SETUP.EXE

SIS597.DRV

SIS597.INF

SISMINI.VXD

Other Flies Related to driver installation

(2) All the 16-color, 256-color, 32K/64K-color, and 16M-color drivers are available

Installation

(1)    Click "Start" menu and select "Control Panel" from "Setting" group.
(2)    Select  "Display" Icon.
(3)    Select  "Settings" index in the display properties sheet.
(4)    Select "Advanced Properties" button.
(5)    Select "Change..." button in "Adapter Type" group.
(6)    Select  "Have Disk" button.
(7)    Place CD-ROM disk in to the CD drive.
(8)    When the  "Install from Disk" dialog box appears, type the directory storing
         the drivers and click "OK."  The directory in the CD-ROM is at
         D:\MM\WIN95
(9)    The "Select Device" dialog box will appear, showing the driver.  Click on "OK"
         and the driver will be installed.
(10)  When the "Advanced Display Properties" dialog box appears, click "Close."
(11)  Select "Close" or "Apply" button from display properties sheet.
(12)  A message will appear stating you must restart the Windows 95 system,
         select  "Yes" to restart.
(13)  After restarting, Windows 95 will run on 640x480x256 color, 60NI.

Selecting Resolution, Color Depth and Refresh Rate

(1) Click  "Start" menu and select Control Panel from Settings group.
(2) Select Display icon.
(3)  Select Settings.
(4) Select "Settings" then to chage between 16 color, 256 color, Hi color, and
       True color.
(5) To select desktop resolution size, go to the Desktop area and use the slide bar
       to change resolution from 640x480, 800x600, 1024x768, and 1280x1024.
(6)  Select "Display Modes".
(7) Select value in Refresh rate list box to change the screen refresh rate.
(8) Click  "OK" or "Apply."

_______________________________________________________________
6- 10

_________________________________

【

【

【

【

6

】

】

】

】

Utilities

(1) Place CD-ROM disk in to the CD drive.

«
...
74
75
76
77
78
...
»

Summary of Contents for R558




























































































Reviews:

No comments

Related manuals for R558

Brand: TYAN Pages: 117

Brand: AKM Pages: 45

Brand: WIN Enterprises Pages: 82

phyBOARD-Subra-i.MX6

Brand: Phytec Pages: 2

Brand: Advantech Pages: 4

NuMicro NuTiny-SDK-NANO100

Brand: Nuvoton Pages: 18

Brand: Aaeon Pages: 50

Brand: Gigabyte Pages: 104

Brand: JETWAY Pages: 57

Brand: Digilent Pages: 23

Brand: Gigabyte Pages: 32

Brand: Gigabyte Pages: 96

Brand: IEI Technology Pages: 194

Brand: ASROCK Pages: 237

Brand: DFI Pages: 97

Brand: DFI Pages: 108

Infinity NF650I Ultra

Brand: DFI Pages: 155

MBD-X11SDV-12C-TP8F

Brand: Supermicro Pages: 123

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands