MTI R558, User Manual, Page: 72 / 91

Interface display driver."
(6) While prompting "Select rendering display driver:"
choose "P386 AutoDesk Device Interface rendering driver."
(7) Perform all the listed instructions and the system will start with the disired
display settings.
3D Studio Version 3.0 Setup
(1) The following procedures assume that
1 - You have completed the unpack & copy procedure.
2 - Your ADI 4.2 drivers are located in C:\ADI 42.
(2) Creat your own
3D Studio V3.0 batch file (say 3DS3.BAT) and add the
following settings to it, or add the following settings to your "AUTOEXEC.BAT
file:
1
- SET RCPADI=C:\ADI42\RCPSIS.EXP
2 - SET RDPADI=C:\ADI42\RCPSIS.EXP
(3) Execute the new 3DS batch file or reboot the computer using the new
"
AUTOEXEC.BAT" to make the new settings effective.
(4) Change your current working directory to \3DS3 (where your 3D Studio V3.0
usually resides).
(5) Delete the original configuration file "3DADI.CFG."
(6) Type
3DS VIBCFG <Enter>
to configure your display environment.
(7) After the "Company Register Screen" appears press <Enter> to continue.
(8) The "Video Environment Configuration Screen" will appear. Please follow the
following procedures to configure your video display environment.
(1) In "Main-Display" item,
(a) Press
<Enter>. The selection menu will appear.
(b) In selection menu, move cursor to "RCPADI"
(c) Press
<Enter>
to select.
(2) In "Material - Display" item,
(a) Press
<Enter>.
The selection menu will appear.
(b) In selection menu, move cursor to "RCPADI"
(c) Press
<Enter>
to select.
(3) In "Render-Display" item,
(a) Press
<Enter>. The selection menu will appear.
(b) In selection menu, move cursor to "RCPADI" or "RDPADI.".
(c) Press
<Enter>
to select.
(4) Complete the other selections and exit configuration.
_______________________________________________________________
6- 6
_________________________________
【 【 【 【
6
】 】 】 】
(9) After the exiting configuration, 3DS will boot automatically using the
environment you just selected.