manualshive.com logo in svg

MTI R547, User Manual

Share
Download
MTI R547 User Manual Download Page 57

4. Next, you will see the "Insert Diskette" dialog box.  Insert the diskette into
    the Floppy drive, and change path to "A:\IDE\NT" in dialog box.

5. Next, In "Select OEM Option " dialog box, choose SiS PCI MASTER IDE
    Miniport Driver " and click " OK "

6. In the " Select SCSI Adapter Option " dialog box, click on the "Install" button
    in the dialog box.

7. When the "SCSI Adapter Setup " dialog box reappears, check whether "
     IDE CR-ROM [ATAPI 1.2]/Dual_channel PCI IDE " is listed.  If yes, select it
     with the mouse and click the " ^Remove" button.

8. Installation is successful if the "SCSI Adapter Setup " dialog box reapears,
    and  "SiS PCI MASTER IDE Miniport Driver " is listed as an installed driver.

9. Reboot your system.

4-6  SiS IDE Driver Installation For Windows NT 4.0

1.   Enter Windows NT 4.0 System
2.   Double click the "My Computer" icon on the Desktop
3.   Double click the "Control Panel" icon in "My Computer"
4.   Double click the "SCSI Adapters" icon in "Control Panel"
5.   Select "Drivers" option in "SCSI Adapters" and click "Add"
6.   Insert the SiS IDE Driver diskette into the Floppy Drive and click "Have
      Disk" in "Install Driver" window
7.   Change path to "A:\IDE\NT"  and click "OK" in "Install From  Disk" window
8.   Choose "SIS PCI MASTER IDE Miniport DRIVER" in "Install Driver" and
      click  "OK"
9.   Change path to "NT" and click "Continue" in "windows NT Setup" window
10. Click "Yes" to restart computer in "System Settings Change" window

_____________________________________________________________
                                                                  4-4

________________________________

 

【

4

】

4-7 SiS IDE Driver Installation For OS/2

Summary of Contents for R547





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands