manualshive.com logo in svg

MTI R547, User Manual

Share
Download
MTI R547 User Manual Download Page 44

3- 4 Power Management Setup

This section provides information on the Green PC power management features.
In order to enable the power management function, please select 

POWER

MANAGEMENT SETUP 

option from the 

CMOS SETUP UTILITY

 menu.

ROM PCI / ISA BIOS

 POWER MANAGEMENT SETUP

                                                AWARD SOFTWARE, INC

  Power Management               :Disable

      VGA Activity                   :Disabled

  PM Control by APM             :Yes

      IRQ3     (COM 2)             :Enabled

  Video Off Option                   :Susp, Stby-> Off

      IRQ4     (COM 1)             :Enabled

  Video Off Method                 :V/H SYNC + Blank       IRQ5     (LPT 2)               :Enabled
  Switch Function                     :Deturbo

      IRQ6     (Floppy Disk)     :Enabled

  MODEM Use IRQ                : 3

      IRQ7     (LPT 1)               :Enabled
      IRQ8     (RTC Alarm)      :Disabled
      IRQ9     (IRQ2 Redir)      :Enabled

                          ** PM Timers **

      IRQ10   (Reserved)          :Enabled

  HDD Off After                       :Disable

      IRQ11   (Reserved)          :Enabled

  Doze Mode                             :Disable

      IRQ12   (PS/2 Mouse)     :Enabled

  Standby Mode                        :Disable

      IRQ13   (Coprocessor)    :Enabled

  Suspend Mode                       :Disable

      IRQ14   (Hard Disk)        :Enabled
      IRQ15   (Reserved)         :Enabled

                           ** PM Events **

  ESC   : Quit                   

↑↓→←

        : Select Item

  COM Ports Activity             :Enabled

  F1      : Help                   PU/PD/+/-  : Modify

  LPT Ports Activity               :Enabled

  F5      : Old Values        (Shift) F2    : Color

  HDD Ports Activity             :Enabled

  F7      : Load Setup Defaults

                     

Power Management Setup Screen

A. Selecting Power Management (PM) Modes:

      Power Management

 (Doze, Standby, and Suspend modes)

User Define

 - User can configure her/his own PM functions.

Disabled

 - Disables the power management functions. (Default setting)

For Minimum.  Saving

 - All timers use the following value --

Doze - 40min, Standby - 40min, Suspend - 40min.

For Max. Saving

 - all timers use the following value--

Doze - 20sec, Standby - 20sec, Suspend - 20sec.

PM Control by APM

This mainboard supports the Intel and Microsoft INT 15h APM BIOS function which
creates an interface to allow the OS to communicate with the SMM code.
If APM is not installed, this option has no effect.

________________________________________________________________
                                                                3-9

【

【

【

【

3

】

】

】

】

___________________________________

Summary of Contents for R547





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands