Matrix Series D Users Manual
4
Part No.
INSTR-025 REL. 071207
INTRODUCTION
This manual was specifically developed to
assist in the installation, interconnection
and operation of the MTE Corporation
Series “D”
Matrix Filter®
.
This manual is intended for use by
personnel experienced in the operation and
maintenance of electronic drives. Because
of the high voltages required by the filter
and drive and the potential dangers
presented by rotating machinery, it is
essential that all personnel involved in the
operation and maintenance of this filter
know and practice the necessary safety
precautions for this type of equipment.
Personnel should read and understand the
instructions contained in this manual before
installing, operating or servicing the filter
and the drive to which the filter is
connected.
Upon Receipt of this Filter:
The MTE Matrix Filter® has been
subjected to demanding factory tests before
shipment. Carefully inspect the shipping
container for damage that may have
occurred in transit. Then unpack the filter
and carefully inspect for any signs of
damage. Save the shipping container for
future transport of the filter.
In the event of damage, please contact
and file a claim with the freight carrier
involved immediately.
If the equipment is not going to be put into
service upon receipt, cover and store the
filter in a clean, dry location. After storage,
ensure that the equipment is dry and that
no condensation has accumulated on the
internal components of the filter before
applying power.
Repair/Exchange Procedure
MTE Corporation requires a Returned
Material Authorization Number before it can
accept any filters that qualify for return or
repair. If problems or questions arise during
installation, setup, or operation of the filter,
please call the Director of Corporate Quality
for assistance at:
Phone: 262-253-8200 ext. 148
FAX: 262-253-8210
