MTD 7100401, Translation Of Original User Instructions

Page: 16 / 44

10
GB
FAULT
Before performing any maintenance and clearing work operation , please take the spark-plug cap off.!
FAULT FAULT CLEARANCE
The engine does not start check the fuel level, if necessary refuel.
check the throttle to be on START position
check the spark-plug connector to be properly attacched
check the spark-plug condition and if necessary replace it
check the fuel valve to be in the opened position (only for the models showing
such feature)
The engine power goes down the air filter is dirty – please clean it
The grass cut is irregular sharpen or replace the cutting blade
adjust the cutting bar clearance
The cutting bar does not work or the wheels are not turning adjust the cutting bar cable
check the wheels to be fasten to the shaft
check the position and the transmission belts position and condition : realign
position and/or replace them.
In case you are not able to remedy the defect/damage according to a.m. table, please contact an authorized service center only .