background image

MANUFACTURER’S LIMITED WARRANTY FOR

GDOC-100015 REV. B

The limited warranty set forth below is given by MTD LLC with 

respect to new merchandise purchased and used in the United States 

and/or its territories and possessions, and by MTD Products Limited 

with respect to new merchandise purchased and used in Canada and/

or its territories and possessions (either entity respectively, “MTD”).
This warranty is in addition to any applicable emissions warranty 

provided with your product.
“MTD” warrants this product (excluding its

 

Normal Wear Parts

 and 

Attachments

 

as described below) against defects in material and 

workmanship for a period of two (2) years commencing on the date 

of original purchase and will, at its option, repair or replace, free of 

charge, any part found to be defective in materials or workmanship. 

This limited warranty shall only apply if this product has been 

operated and maintained in accordance with the Operator’s Manual 

furnished with the product, and has not been subject to misuse, 

abuse, commercial use, neglect, accident, improper maintenance, 

alteration, vandalism, theft, fire, water, or damage because of other 

peril or natural disaster. Damage resulting from the installation or use 

of any part, accessory or attachment not approved by MTD for use 

with the product(s) covered by this manual will void your warranty as 

to any resulting damage.

Normal Wear Parts 

are warranted to be free from defects in material 

and workmanship for a period of thirty (30) days from the date of 

purchase. Normal wear parts include, but are not limited to items 

such as: batteries, belts, blades, blade adapters, tines, grass bags, 

wheels, rider deck wheels, seats, snow thrower skid shoes, friction 

wheels, shave plates, auger spiral rubber and tires.

Attachments

 — 

MTD warrants attachments for this product against 

defects in material and workmanship for a period of one (1) year, 

commencing on the date of the attachment’s original purchase or 

lease. Attachments include, but are not limited to items such as:  

grass collectors and mulch kits.

HOW TO OBTAIN SERVICE: 

Warranty service is available, WITH 

PROOF OF PURCHASE, through your local authorized service dealer. 

To locate the dealer in your area:

In the U.S.A.

Check your Yellow Pages, or contact MTD LLC at P.O. Box 361131, 

Cleveland, Ohio 44136-0019, or call 1-800-800-7310, 1-330-220-

4683 or log on to our Web site at www.mtdproducts.com.

In Canada

Contact MTD Products Limited, Kitchener, ON N2G 4J1, or call 1-800-

668-1238 or log on to our Web site at www.mtdcanada.com.
This limited warranty does

 not 

provide coverage in the following 

cases:
a.  The engine or component parts thereof. These items may carry a 

separate manufacturer’s warranty. Refer to applicable manufac-

turer’s warranty for terms and conditions.

b.  Log splitter pumps, valves, and cylinders have a separate one- 

year warranty.

c.  Routine maintenance items such as lubricants, filters, blade 

sharpening, tune-ups, brake adjustments, clutch adjustments, 

deck adjustments, and normal deterioration of the exterior finish 

due to use or exposure.

d.  Service completed by someone other than an authorized service 

dealer.

e.  MTD does not extend any warranty for products sold or exported 

outside of the United States and/or Canada, and their respective 

possessions and territories, except those sold through MTD’s 

authorized channels of export distribution.

f.  Replacement parts that are not genuine MTD parts.
g.  Transportation charges and service calls.
h.  MTD does not warrant this product for commercial use.

No implied warranty, including any implied warranty of 

merchantability or fitness for a particular purpose, applies after 

the applicable period of express written warranty above as to the 

parts as identified. No other express warranty, whether written or 

oral, except as mentioned above, given by any person or entity, 

including a dealer or retailer, with respect to any product, shall 

bind MTD. During the period of the warranty, the exclusive remedy 

is repair or replacement of the product as set forth above.
The provisions as set forth in this warranty provide the sole and 

exclusive remedy arising from the sale. MTD shall not be liable 

for incidental or consequential loss or damage including, without 

limitation, expenses incurred for substitute or replacement lawn 

care services or for rental expenses to temporarily replace a 

warranted product.

Some states do not allow the exclusion or limitation of incidental 

or consequential damages, or limitations on how long an implied 

warranty lasts, so the above exclusions or limitations may not apply 

to you.
In no event shall recovery of any kind be greater than the amount of 

the purchase price of the product sold. 

Alteration of safety features of 

the product shall void this warranty.

 You assume the risk and liability 

for loss, damage, or injury to you and your property and/or to others 

and their property arising out of the misuse or inability to use the 

product.
This limited warranty shall not extend to anyone other than the 

original purchaser or to the person for whom it was purchased as a 

gift.

HOW STATE LAW RELATES TO THIS WARRANTY: 

 This limited 

warranty gives you specific legal rights, and you may also have other 

rights which vary from state to state.

IMPORTANT:  

Owner must present Original Proof of Purchase to 

obtain warranty coverage.

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-800-800-7310, 1-330-220-4683 

MTD Canada Limited - KITCHENER, ON N2G 4J1; Phone 1-800-668-1238

Summary of Contents for 452J Series





















Reviews: