Controls and Features
4
10
Chipper Chute
Allows twigs and small branches up to 2” in diameter to be fed
into the impeller for chipping. See Fig. 4-1.
Hopper
Allow leaves and small branches up to 1/2 diameter to be fed into
the impeller for chipping and shredding. Material can be raked
into the hopper by lowering it down to the ground.
Release Rod
The release rod is located on the impeller bracket assembly and it
is used to release or lock the hopper when raising or lowering.
Figure 4-1
Discharge Chute
The discharge chute is where the material exits the unit and can
be bagged.
Engine Controls
See the engine Owner/Operator manual packed with your unit
for the location and function of the controls on the engine.
Hopper
Discharge Chute
Chipper Chute
Release Rod
Summary of Contents for 452J Series
Page 19: ...Notes 10 19 ...
