Assembly & Set-Up
3
6
WARNING!
Before installing attachment, place
tractor on a firm and level surface. Place the PTO in
the disengaged (OFF) position, set the parking
brake, shut engine off and remove key to prevent
unintended starting.
NOTE:
References to LEFT and RIGHT indicate the left and
right sides of the tractor when facing forward in the operator’s
position. Reference to the FRONT indicates the grille end; to the
REAR the drawbar end.
Your tractor’s cutting deck, PTO belt and front deck stabilizer
bracket must be removed prior to mounting the snow thrower
attachment. Refer to your tractor’s Operator’s Manual for
detailed instructions. If your tractor is equipped with any front-
end accessory (i.e. front bumper kit), it must also be removed.
Do you have an Electric PTO or Manual PTO?
If you engage your tractor’s cutting deck by using your right
hand to pivot a lever forward, your tractor has a Manual PTO. If
you engage your tractor’s cutting deck by pulling outward on
a small knob located on the tractor’s dash, your tractor has an
Electric PTO.
Assembly
Mounting The Idler Assembly
NOTE:
There are two different styles of undercarriages, yours
may differ slightly from the following images.
Electric PTO Undercarriage Assembly Setup
Proceed as follows when mounting this snow thrower
attachment to a tractor equipped with an electric PTO:
Attach one end of the extension spring (732-0594A) to the
1.
hole in the idler assembly. Mount the opposite end of the
extension spring to the slotted fitting as illustrated in Fig.
3-1.
Refer to Fig. 3-2 for correct position.
2.
Figure 3-1
Contents of Carton
One Auger Housing Assembly
•
One Upper Chute Crank Rod
•
Operator’s Manual
•
One Lift Handle Assembly
•
One Undercarriage Assembly
•
Two Self-adhesive Reflectors
•
One Hardware Pack
•
Slotted Fitting
Extension Spring
Idler Pulley &
Idler Bracket
Forw
ard
Contents of Hardware Pack
Two Quick Release Pins
•
Two Extension Springs
•
Two Shoulder Bolts & Lock Nuts
•
Three Cable Ties (725-0157)
•
Figure 3-2
Summary of Contents for 190-032
Page 17: ...Notes 7 17...
