Chute Control Rod
To adjust the chute control rod, proceed as follows:
Remove the cotter pin from the hole closest to the chute
1.
assembly on the chute control assembly.
Pull out the chute control rod until the hole in it lines up
2.
with the second hole in the chute control assembly. See
Fig. 6-7.
Reinsert the cotter pin through this hole and the chute
3.
control rod. See Fig. 6-7.
Off-Season Storage
If the snow thrower will not be used for 30 days or longer, follow
the storage instructions below.
Lubricate the machine as instructed earlier in this section.
1.
Store in a clean, dry area.
2.
If storing the snow thrower in an unventilated area,
3.
rustproof the machine using a light oil or silicone to coat
the snow thrower.
Clean the exterior of the engine and the snow thrower.
4.
NOTE: Refer to the Engine Operator’s Manual for information on
storing your engine.
Fig. 6-7
18
S
ectioN
6 — M
aiNteNaNce
& a
djuStMeNtS
Summary of Contents for 31AH54LG504
Page 28: ...28 Notes...
Page 29: ...28 Notes...
