OPERATING AND MAINTENANCE MANUAL
Chapter 2 - Safety
TAEevo Tech 015÷802 60 Hz UL
13
The data in this manual are not binding and they can be modified by the manufacturer without notice.
Reproduction of this manual is strictly prohibited
EN
ENGLISH
Model TAEevo Tech 702÷802
NOTE
Weight values are guideline, with the water circuit empty. The values may vary in relation to the configuration of the unit
(pump type, supply type, and ventilation type).
2 . 4
P r e c a u t i o n s t o b e a d o p t e d d u r i n g i n s t a l l a t i o n
The connections to be prearranged concern the process water circuit. For connection to the mains electrical supply consult
the technical documentation attached to the unit.
2 . 5
P r e c a u t i o n s t o b e a d o p t e d d u r i n g o p e r a t i o n
The unit must be operated by competent personnel under the guidance of a qualified supervisor.
All water pipelines must be painted or clearly marked in compliance with local safety prescriptions in force in the place of
installation.
ATTENTION
Do not remove or tamper with safety devices, protections, or the insulating materials installed in the unit and in the
auxiliary equipment.
All electrical connections must comply with local codes.
The unit and its auxiliary equipment must be connected to earth and protected against short circuits and overloads.
When mains power is switched on, lethal voltages are present in the electrical circuits and extreme caution must be exercised
if any work must be carried out on the electrical system.
Do not open the electrical equipment guard panels while the circuit is energized. Operations that require intervention with the
electrical circuit energized must be performed only by qualified personnel using appropriate equipment and wearing apparel
and devices designed to protect against electrical hazards.
2 . 6
M a i n t e n a n c e p r e c a u t i o n s
ATTENTION
When it is necessary to discharge waste material do not pollute water pipelines, groundwater or watercourses.
Avoid the combustion of materials that could produce fumes that are toxic and harmful when released into the atmosphere.
Protect the environment by using only approved methods of disposal.
Keep a written record of all work carried out on the unit and the auxiliary equipment. The frequency and the nature of the
work required over a period can reveal adverse operating conditions that should be corrected.
4
OOKP