INSTALLATION
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow these mounting instructions.
Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit
to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
Screw
Side view showing
Screw Holes marked T, N
Factory Radio
Mounting
Bracket
Dashboard or Console
Screw
To fasten the unit to the factory radio mounting brackets.
Align the screw holes on the bracket with the screw holes on the unit, and then
tighten the screws (5x5mm) on each side.
Note:
the outer trim ring, sleeve and the metal strap are not used for method
B
installation.
31
UK